Clamp-On Rotary Pump

Rotary Pump

Procon's Series 4 104E165F11XX is a clamp on positive displacement rotary vane pump is designed to self-prime in water with a 6 ft. maximum lift. This pump features port sizes with 1/2 NPT inlet and outlet ports. Engineered to produce lower vibration and pulsation levels. Typically used in carbonation, espresso/coffee, welding, cold carb circulation, reverse osmosis, beer chillers, pesticide systems, and solar applications.

Specifications:

• Product Classification: Rotary Vane Pump
  
• Agency Approvals: Non-Food Grade (1.5% Max. Lead)- No Agency Approval
  
• Series: Series 4 Brass
  
• Mounting And Drive Configuration: Bolt On With Single Flat Drive
  
• Flowrate: 165 GPH
  
• Elastomer: FDA Grade Nitrile - Type 21 Or Type 2106 Used Interchangeably
  
• Rotation / Slinger / Passivation / Strainer: Clockwise
  
• Clearances: Standard Clearance
  
• Valve Type and Configuration: No Relief Valve
  
• Pressure Range (Relief Valve Spring): No Setting
  
• Body Material Type: Brass
  
• Nominal Speed: 1725 RPM
  
• Typical Horsepower Required: .25 To 1.50 HP
  
• Maximum Discharge Pressure: 250 PSI
  
• Rotation (Viewed from Nameplate End): Clockwise
  
• Weight: 4.00 lbs.
  
• Dimensions: 4.1" x 3.88" x 4.48"
  
• Self-Priming (Water): 6 Ft. Maximum Lift
  
• Port Size: 1/2 NPT Inlet and Outlet
  

Applications:

• Circulation
  
• Reverse Osmosis
  
• Booster Pumps
  
• Solar Applications
  
• Hydraulic Systems
  
• Desalination

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm (For more information go to www.p65warnings.ca.gov).