Rotary Pump

Procon's 104E265F12XX Series 4 clamp on positive displacement rotary vane pump is made to be self-priming in water with a 6 ft. maximum lift and features a bolt-on mounting system. This pump features port sizes with 1/2 NPT inlet and outlet ports. Engineered to produce lower vibration and pulsation levels. Typically used in carbonation, espresso/coffee, welding, cold carb circulation, reverse osmosis, beer chillers, pesticide systems, and solar applications.

Specifications:

• Product Classification: Rotary Vane Pump
• Agency Approvals: - Non-Food Grade (1.5% Max. Lead)- No Agency Approval
• Series: Series 4 Brass
• Mounting And Drive Configuration: Bolt On With Single Flat Drive
• Flowrate: 265 GPH
• Elastomer: FDA Grade Nitrile - Type 21 Or Type 2106 Used Interchangeably
• Rotation / Slinger / Passivation / Strainer: Clockwise
• Clearances: SPCL Clearance (1x) Liner & BRGS 
• Valve Type and Configuration: No Relief Valve
• Pressure Range: No Setting
• Body Material Type: Brass
• Nominal Speed: 1725 RPM
• Typical Horsepower Required: .25 To .50 HP
• Maximum Discharge Pressure: 250 PSI
• Rotation (Viewed from Nameplate End): Clockwise
• Dry Weight: Approximately 4.5 lbs.
• Dimensions: 4.1" x 3.88" x 4.48"
• Self-Priming (Water): 6 Ft. Maximum Lift
• Port Size: 1/2 NPT Inlet and Outlet

Applications:

• Circulation
• Reverse Osmosis
• Booster Pumps
• Solar Applications
• Hydraulic Systems
• Desalination

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm (For more information go to www.p65warnings.ca.gov).