Stainless Steel Rotary Vane Pump

Procon's Series 5 positive displacement rotary vane pump is made to be self-priming in water with a 6 ft. maximum lift. This pump features port sizes with 1/2 NPT inlet and outlet ports. Engineered to produce lower vibration and pulsation levels. Typically used in circulation, reverse osmosis, booster pumps, solar applications, hydraulic systems, desalination applications.

Specifications:

• Product Classification: Rotary Vane Pump
• Agency Approvals: Non-Food Grade
• Series: Series 5 Stainless Steel
• Mounting and Drive Configuration: Bolt on With Single Flat Drive
• Flowrate: 330 GPH (High Flow) - No Relief Valve
• Elastomer: FDA Grade Nitrile
• Rotation / Slinger / Passivation / Strainer: Clockwise / Slinger
• Clearances: Standard Clearance
• Valve Type and Configuration: No Relief Valve
• Pressure Range: - No Setting
• Body Material Type: 303 Stainless Steel
• Capacity: 330 GPH
• Nominal Speed: 1725 RPM
• Typical Horsepower Required: .25 To 1.5 HP
• Maximum Discharge Pressure: 250 PSI
• Rotation (Viewed from Nameplate End): Clockwise
• Dry Weight: Approximately 4.5 Lbs.
• Dimensions: 4.1" X 3.88" X 4.48"
• Self-Priming (Water): 6 Ft. Maximum Lift
• Port Size: 1/2 NPT Inlet and Outlet 

Applications:

• Circulation
• Reverse Osmosis
• Booster Pumps
• Solar Applications
• Hydraulic Systems
• Desalination 

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm (For more information go to www.p65warnings.ca.gov).