Positive Displacement Rotary Pump

Procon's 101A035F11BC is a Series 1 positive displacement rotary vane pump features a clamp on design with .188" double flat drive system. Self-primes in water with a 6 ft. maximum lift. This pump features port sizes with 3/8 NPT inlet and outlet ports. Engineered to produce lower vibration and pulsation levels. Typically used in carbonation, espresso/coffee, welding, cold carb circulation, reverse osmosis, beer chillers, pesticide systems, and solar applications.

Specifications: 

• Product Classification: Rotary Vane Pump 
• Agency Approvals: Non-Food Grade (1.5% Max Lead) No Agency Approval 
• Series: Series 1 Brass - Integral Strainer 
• Mounting and Drive Configuration: Clamp on with .188" Double Flat Drive 
• Flowrate: 35 GPH (0.5833 GPM) 
• Elastomer: FDA Grade Nitrile - Type 21 or Type 2106 Used Interchangeably 
• Rotation / Slinger / Passivation / Strainer: Clockwise 
• Clearances: Standard Clearance 
• Valve Type and Configuration: Plastic, Hi Temp-Solid 
• Pressure Range: 60 to 99 PSI - Default Setting 99 PSI  
• Body Material Type: Brass 
• Nominal Speed: 1725 RPM 
• Typical Horsepower Required: .25 To .50 HP 
• Maximum Discharge Pressure: 250 PSI 
• Rotation (Viewed from Nameplate End): Clockwise 
• Dry Weight: Approximately 2.5 Lbs. 
• Dimensions: 3.56" X 3.49" X 3.86" 
• Self-Priming (Water): 6 Ft. Maximum Lift 
• Port Size: 3/8 NPT Inlet and Outlet  

Applications: 

• Carbonation 
• Espresso/Coffee 
• Welding 
• Cold Carb Circulation 
• Reverse Osmosis 
• Beer Chillers 
• Pesticide Systems 
• Solar Applications

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm (For more information go to www.p65warnings.ca.gov).