Rotary Pump

Procon's Series 4 positive displacement rotary vane pump is made to be self-priming in water with a 6 ft. maximum lift. This pump features port sizes with 1/2 NPT inlet and outlet ports. Engineered to produce lower vibration and pulsation levels. Typically used in carbonation, espresso/coffee, welding, cold carb circulation, reverse osmosis, beer chillers, pesticide systems, and solar applications.

Specifications:

• Product Classification: Rotary Vane Pump
  
• Agency Approvals: Non-Food Grade (1.5% Max. Lead)- No Agency Approval
  
• Series: Series 4 Brass
  
• Mounting And Drive Configuration: Long Clamp On With Double Flat Drive
  
• Flowrate: 240 GPH
  
• Elastomer: Fluorocarbon - Type 21 Seal
  
• Rotation / Slinger / Passivation / Strainer: Clockwise
  
• Clearances: SPCL Clearance (1x) LINER & BRGS
  
• Valve Type and Configuration:  Plastic, Hi Temp-Solid
  
• Pressure Range: 60 TO 99 PSI - Default Setting 99 PSI
  
• Body Material Type: Brass
  
• Nominal Speed: 1725 RPM
  
• Typical Horsepower Required: .25 To .50 HP
  
• Rotation (Viewed from Nameplate End): Clockwise
  
• Dry Weight: Approximately 4.5 lbs.
  
• Dimensions: 4.1" x 3.88" x 4.48"
  
• Self-Priming (Water): 6 Ft. Maximum Lift
  
• Port Size: 1/2 NPT Inlet and Outlet
  
• Relief Valve Pressure Setting: 099 PSI
  

Applications:

• Circulation
  
• Reverse Osmosis
  
• Booster Pumps
  
• Solar Applications
  
• Hydraulic Systems
  
• Desalination

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm (For more information go to www.p65warnings.ca.gov).