Rotary Pump

Procon's 101B070R12BA is a Series 1 positive displacement rotary vane pump is made to be self-priming in water with a 6 ft. maximum lift. This pump features port sizes with 3/8 NPT inlet and outlet ports. Engineered to produce lower vibration and pulsation levels. Typically used in carbonation, espresso/coffee, welding, cold carb circulation, reverse osmosis, beer chillers, pesticide systems, and solar applications.

Specifications:

• Product Classification: Rotary Vane Pump
  
• Agency Approvals: NSF STD. 169 Listed (1.5% Max Lead)
  
• Series: Series 1 Brass - Integral Strainer
  
• Mounting And Drive Configuration: Clamp On With 1143 Bronze Coupling
  
• Flowrate: 70 GPH
  
• Elastomer: Fluorocarbon - Type 21 Seal
  
• Rotation / Slinger / Passivation / Strainer: Clockwise
  
• Clearances: SPCL Clearance (1x) Liner and BRGS
  
• Valve Type and Configuration: Plastic, Hi Temp-Solid
  
• Pressure Range: 151 to 250 PSI 
  
• Body Material Type: Brass
  
• Nominal Speed: 1725 RPM
  
• Typical Horsepower Required: .25 To .50 HP
  
• Maximum Discharge Pressure: 250 PSI
  
• Rotation (Viewed from Nameplate End): Clockwise
  
• Dry Weight: Approximately 2.5 Lbs.
  
• Dimensions: 3.56" X 3.49" X 3.86"
  
• Self-Priming (Water): 6 Ft. Maximum Lift
  
• Port Size: 3/8 NPT Inlet and Outlet 
  

Applications:

• Carbonation
  
• Espresso/Coffee
  
• Welding
  
• Cold Carb Circulation
  
• Reverse Osmosis
  
• Beer Chillers
  
• Pesticide Systems
  
• Solar Applications

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm (For more information go to www.p65warnings.ca.gov).