Rotary Pump

Procon's Series 3 positive displacement rotary vane pump is made to be self-priming in water with a 6 ft. maximum lift. This pump features port sizes with 3/8 NPT inlet and outlet ports. Engineered to produce lower vibration and pulsation levels. Typically used in carbonation, espresso/coffee, welding, cold carb circulation, reverse osmosis, beer chillers, pesticide systems, and solar applications.

Specifications:

• Product Classification: Rotary Vane Pump
  
• Agency Approvals: NSF STD. 169 Listed (1.5% Max Lead)
  
• Series: Series 3 Stainless Steel
  
• Mounting And Drive Configuration: Bolt On With Single Flat Drive
  
• Flowrate: 100 GPH
  
• Elastomer: FDA Grade Nitrile - Type 21 or Type 2106 Used Interchangeably
  
• Rotation / Slinger / Passivation / Strainer: Counterclockwise / Slinger
  
• Clearances: Standard Clearance
  
• Valve Type and Configuration: No Relief Valve
  
• Pressure Range: No Setting
  
• Body Material Type: 303 Stainless Steel
  
• Nominal Speed: 1725 RPM
  
• Typical Horsepower Required: .25 To .50 HP
  
• Maximum Discharge Pressure: 250 PSI
  
• Rotation (Viewed from Nameplate End): Clockwise
  
• Dry Weight: Approximately 2.5 Lbs.
  
• Dimensions: 3.56" X 3.49" X 3.86"
  
• Self-Priming (Water): 6 Ft. Maximum Lift
  
• Port Size: 3/8 NPT Inlet and Outlet 
  

Applications:

• Carbonation
  
• Espresso/Coffee
  
• Welding
  
• Cold Carb Circulation
  
• Reverse Osmosis
  
• Beer Chillers
  
• Pesticide Systems
  
• Solar Applications