Submersible Pump

Designed with Sta-Rite's SignaSeal staging system that provides 1st-in-class performance with superior sand handling. The thrust management staging system capable of dry run. Pump operation noise is reduced as liquid passes over the motor which is used to cool the motor. For clean water and grey water applications can be used in residential, commercial, and agricultural settings.

Specifications:

• GPM: 30
  
• HP: 1/2
  
• Max. Load Amps: 4.6
  
• Volts: 230
  
• Phase/Cycles: 1/60
  
• Cord Length: 10'
  
• Pallet Quantity: 40
  
• Weight (Lbs.): 19
  
• Shell: Stainless steel (300 grade)
  
• Discharge: 1-1/4" Fiberglass-reinforced thermoplastic
  
• Discharge Bearing: Nylatron¨
  
• Impellers: Acetal
  
• Diffusers: Polycarbonate
  
• Suction Caps: Polycarbonate with stainless steel wear ring
  
• Thrust Pads: Proprietary spec.
  
• Shaft and Coupling: Stainless steel 300 grade
  
• Intake: Fiberglass-reinforced thermoplastic
  
• Intake Screen: Stainless steel
  
• Jacketed Cord: 300 Volt "SJOW" jacketed 10' leads, 2-wire with ground
  
• Agency Listing: CSA

Features:

• Proven Stage System: SignaSeal staging system utilizes a patented ceramic wear surface. When incorporated with STA-RITE's "true" independent floating impellers, dominates with 1st-in-class performance, superior sand handling, and a thrust management staging system with industry exclusive "dry-run" capabilities
  
• Superior "Draw-Down" Capability: lowest draw-down of 4-1/2" (a standard 4" NEMA submersible only draws-down to 13-1/2")
  
• Reduced Amp Draw: 25% less amp draw (9.5 amps vs. 12.7 amps, 115 volt) than 4" NEMA submersibles reducing operating costs and extends float switch contact service life 
  
• Cooler And Quieter Operation: Pumped liquid passes over the motor which is used to cool the motor and also dampens motor noise
  
• Impellers: Precision molded for perfect balance that ultra-smooth to provide the highest performance and efficiency. Tolerates .080" solids
  
• Shaft: Positive drive, hexagonal 7/16" - 300-grade stainless steel shaft
  
• Shaft Bearing: Exclusive self-lubricating Nylatron¨ bearing resists surface wear from sand and abrasives
  
• Shell: Corrosion resistant 300-grade stainless steel