Series 1 Rotary Vane Pump

The Procon Series 1 pump feature the protection of an integral inlet strainer, which has a 100 mesh wire screen. Not only does the strainer trap particles that could damage the pump, but it also has a removable cap to allow for periodic cleaning. It is recommended to clean the strainer every 4 months under normal use. 

Dimensions:  3.56" x 3.49" x 3.86" 

• Mounting and drive configuration: clamp-on with 0.188" double flat drive
• Flow rate: 100 GPH
• Elastomer: FDA grade nitrile
• Rotation: clockwise
• Valve type and configuration: plastic, high temperature solid
• Pressure range: 151-250 psi (default setting 170 psi)
  
• NSF Standard 169 Listed 
• Brass construction with integral strainer
• Standard clearance
• Nominal speed: 1725 RPM
• Typical horsepower required: 0.25 to 0.50 hp
• Maximum discharge pressure: 250 psi
• Self priming (water): 6 ft. maximum lift
• Port size: 3/8" NPT inlet and outlet
• Primary application: carbonated water
• Procon model # 111A100F11BA

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm (For more information go to www.p65warnings.ca.gov).