Bolt-On Pump

Procon's 102E140F12XX is a Series 2 positive displacement rotary vane pump is capable of self-priming in water with a 6 ft. maximum lift. This pump is equipped with 3/8 NPT inlet and outlet ports. Engineered to produce lower vibration and pulsation levels. Typically used in carbonation, espresso/coffee, welding, cold carb circulation, reverse osmosis, beer chillers, pesticide systems, and solar applications.

Specifications:

• Product Classification: Rotary Vane Pump
  
• Agency Approvals: Non-Food Grade (1.5% Max. Lead)- No Agency Approval
  
• Series: Series 2 Brass
  
• Mounting and Drive Configuration: Bolt-On with Single Flat Drive
  
• Flowrate: 140 GPH
  
• Elastomer: FDA Grade Nitrile
  
• Rotation / Slinger / Passivation / Strainer: Clockwise
  
• Clearances: SPCL Clearance (1x) Liner and BRGS.
  
• Valve Type and Configuration: No Relief Valve
  
• Pressure Range: No Setting
  
• Body Material Type: Brass
  
• Nominal Speed: 1725 RPM
  
• Typical Horsepower Required: .25 To .50 HP
  
• Maximum Discharge Pressure: 250 PSI
  
• Rotation (Viewed from Nameplate End): Clockwise
  
• Dry Weight: Approximately 2.5 Lbs.
  
• Dimensions: 3.56" X 3.49" X 3.86"
  
• Self-Priming (Water): 6 Ft. Maximum Lift
  
• Port Size: 3/8 NPT Inlet and Outlet 
  

Applications:

• Carbonation
  
• Espresso/Coffee
  
• Welding
  
• Cold Carb Circulation
  
• Reverse Osmosis
  
• Beer Chillers
  
• Pesticide Systems
  
• Solar Applications

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm (For more information go to www.p65warnings.ca.gov).