ET Series Pump

The General Pump ET1810S17SS is an ET Series triplex plunger pump with a solid 24 mm shaft. The fluid end is constructed with 316 stainless steel to provide superior corrosion resistance extending the life of the pump's head. Incorporates a new generation seal package for increased effectiveness. Produces a maximum flow rate of 3.4 GPM, tolerates a maximum pressure of 2175 PSI, and maximum speed of 1750 RPM.

Specifications:

• Maximum Volume: 4.0 GPM
• Maximum Discharge Pressure: 2,175 PSI
• Horsepower: 6.0 EBHP
• Maximum Pump Speed: 1750 RPM
• Maximum Inlet Pressure: 125 PSI
• Max. Inlet Vacuum: 3 ft. water (2.6 Hg)
• Plunger Bore: .708 in./18 mm
• Plunger Stroke: .472 in./12 mm
• Oil Capacity: 8.5 oz.
• Maximum Fluid Temperature: 165° F
• Inlet Port Thread: 1/2"-14 BSP-F
• Discharge Port Thread: 3/8"-19 BSP-F
• Shaft Diameter: .945 in./24 mm
• Weight: 11.0 lbs.
• Dimensions: 8" x 7.4" x 4.7"

Features:

• 316 SS fluid end for superior corrosion resistance
• New Generation seal package
• Dust protection chamber
• Solid ceramic plungers
• Oversized plunger guide
• Optimized inlet and outlet valves
• Oversized crankcase

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm (For more information go to www.p65warnings.ca.gov).